One special device equipped on the top of the compactor, is one of the most important part of the compactor.
First, let’s see what it is. This screw forcing feeding system is installed at the inlet of the machine, which includes the frame, chamber, pre-press motor and screw. The pre-press motor with the inverter is fixed on the above of the frame and can adjust the feeding speed according to different material density, and the screw is equipped inside the chamber, the chamber is cone-shape.
Second, why we install the screw force feeding for the compactor. Due the low density of the materials, the materials are too light to fall down to the compactor, here we must use one forcing feeding device to push the materials down for compacting to avoid blocking up the machine. It can highly increase the forming ratio and the finished briquettes strength.
Furthermore, to adjust the speed of the feeding device and get the enough pre-pressure that we need, the materials density can be greatly increased, at the same time, eliminate the loose air among the fine powders for next compacting process.
E.P has abundant experiences to process light dry powders into briquettes, like lime powders, manganese powders, fluorite powders, aluminum powders, etc. Choosing E.P compactor with screw forcing feeder is your best choice.
