The following provides some information about Problems and solutions that may occur
during the
coal briquetting process
:
Problem 1: The coal socket is misaligned.
Solution: Loosen the adjusting bolt and tighten it after making some adjustment.
Problem 2: The coal briquetting pressure does not hit the standard.
Solution: The suction port may get plugged, open it and cleaning; At the joint point,
sealing gasket deforms and needs to replace.
Problem 3: Low pressure or high breakage rate of the
coal briquette press machine
Solution: Adjust the amount of feed raw material, check the size and moisture content of it; check oil pressure as well as condition of the adhesive.
Problem 4: The surface of the coal briquettes is not smooth enough.
Solution: Adjust the amount of feed material and adjust the moisture supplied.
Problem 5:
low briquetting ratio
Check the wear condition of the triangle lining and roller, adjust the feeding amount and oil pressure.
E.P Machinery specializes in the production of
coal briquette machines, dry powder briquetting machines, desulfurization gypsum press machines, ore powder briquetting machines, etc. We will provide you most comprehensive after-sale service includes on-site installation, equipment commissioning, and employee training.
