This
hammer mill is mainly used to crush corn crops, straw, peanut skin, bean stalks and other crop wastes, it can avoiding the waste biomass resources, protecting the environment and developing renewable energy. The hammer mill produced by E.P is simple and convenient to operate.
Precautions when using this
hammer grinder:
1. Check if there is anything in the crushing chamber, if not, turn on the power.
2. Tighten the upper cap and the butterfly bolt of the crushing chamber.
3. Start the motor, let the machine run for 1-2 minutes without adding any raw material, then gradually feed the material from the feeding tray. The feeding speed should not be too fast.
4. If the material is stuck and the motor does not run, please turn it off immediately to avoid the motor burning. After the stuck material is removed, you can continue to use it.
5. During the working process of the machine, it is forbidden to open the upper cover and reach into the crushing chamber by hand.
6. This machine is a dry type grinder that is not used to pulverize wet and greasy materials.
7. Please replace the different screens according to the your different needs.
8. This machine adopts overheat protector. If the motor load is too large, it will stop automatically.
E.P Machinery specializes in the production of
roller compactor, biomass briquette machines, force mixer
, dustless charcoal grinding machine, charcoal extruder machine, shisha charcoal briquette machine etc.
